TR110 Concealed T-Band Guided Roller Blind

Built for Tall Windows and Concealed Curtain Boxes

The NewHoo TR110 is an indoor T-band guided roller blind developed for concealed installation inside curtain boxes and ceiling recesses.

It supports widths from 0.7 to 4 metres and heights up to 4 metres, making it suitable for tall windows, glazed doors and floor-to-ceiling openings.

The roller assembly can be installed and removed from below, allowing easier installation and maintenance where space inside the curtain box is limited.

Designed to Solve Curtain-Box Installation Problems

Concealed roller blinds can become difficult to install or service once the ceiling and curtain box are completed.

TR110 addresses three common project concerns:

• Limited access inside narrow curtain boxes
• Difficult fabric or roller replacement after installation
• Fixed side-rail structures that are difficult to adjust on site

Its bottom-access roller assembly, plug-in headbox cover and detachable end-cap arms provide a more flexible solution for installation, adjustment and after-sales maintenance.

Bottom-Access Roller Assembly

The fabric roller assembly is installed and removed from below.

Installers do not need to open the ceiling or access the system from above, making TR110 more practical for narrow curtain boxes and completed interior spaces.

This structure helps simplify:

• Initial roller assembly installation
• Fabric replacement
• Motor and roller inspection
• After-sales maintenance
• Component removal without dismantling the curtain box

A suitable lower access opening should be reserved during the curtain-box design stage.

110 × 110 mm Plug-In Headbox

TR110 uses a 110 × 110 mm headbox with sheet-metal end caps.

The headbox cover adopts a top-down plug-in structure, allowing it to be connected and removed without a complicated fastening process.

This modular design supports faster assembly while maintaining the clean appearance required for recessed installations.

Detachable End-Cap Arms

The end-cap support arms are separated from the main end caps.

This structure allows TR110 to work with different side-rail configurations and gives installers more flexibility when adjusting the guide rails on site.

It is particularly useful when:

• Different projects require different side rails
• The opening has minor construction deviations
• Rail positions need final on-site adjustment
• Customized guide-track configurations are required

This helps distributors and project contractors use one main system structure across a wider range of installation requirements.

T-Band Fabric Guidance

T-shaped retaining bands are connected to both sides of the fabric and run inside the guide rails.

Compared with a free-hanging roller blind, the guided structure helps keep the fabric edges aligned and reduces uncontrolled side-to-side movement.

For tall indoor openings, this provides:

• More controlled fabric movement
• Better edge alignment
• A neater appearance when lowered
• Improved suitability for tall fabric panels

TR110 is designed for indoor guided shading. A specific wind-resistance rating should only be stated when supported by test data for the selected size and configuration.

Designed for Openings up to 4 Metres High

TR110 supports widths from 0.7 to 4 metres and heights up to 4 metres.

Its main advantage over TR85 is greater height capability:

• Choose TR85 when the main requirement is a single width exceeding 4 metres.
• Choose TR110 when the opening is up to 4 metres wide but requires a height of up to 4 metres, concealed installation and easier future maintenance.

The final size should be confirmed according to the fabric, motor, width-to-height ratio and installation conditions.

Technical Specifications

Final dimensions depend on the selected fabric, motor, opening size and installation conditions.

Recommended Applications

TR110 is suitable for:

• Floor-to-ceiling windows
• Tall glazed doors
• Villas and apartments
• Hotels and office buildings
• Commercial showrooms
• Indoor curtain-wall openings
• Ceiling-recessed roller blind projects
• Installations requiring future fabric or roller replacement

When to Choose TR110

TR110 is recommended when:

• The blind must be concealed inside a curtain box
• The opening height may reach 4 metres
• Installation and maintenance access is available mainly from below
• Different side-rail options may be required
• On-site rail adjustment is important
• Future fabric or roller replacement must remain practical

Another system should be selected if the project requires a width exceeding 4 metres or outdoor wind-rated performance.

Project Information Required

To confirm the correct configuration, provide:

• Finished opening width and height
• Curtain-box internal dimensions
• Lower maintenance access size
• Fabric specification
• Motor and control requirements
• Required side-rail type
• Installation drawings or site photographs

Confirming these details before production helps prevent insufficient access space and side-rail alignment problems.

Frequently Asked Questions

What is the maximum size of TR110?

TR110 supports widths from 0.7 to 4 metres and heights up to 4 metres. Final dimensions require project evaluation.

Can the roller assembly be removed after installation?

Yes. The roller assembly is designed to be installed and removed from below, provided that sufficient lower access is reserved.

Why are the end-cap arms detachable?

The detachable arms allow the system to adapt to different side rails and make on-site alignment more flexible.

What is the difference between TR110 and TR85?

TR110 is better suited to tall openings up to 4 metres high. TR85 is designed primarily for extra-wide openings exceeding 4 metres.

Is TR110 suitable for outdoor use?

TR110 is primarily designed for indoor concealed installations. Outdoor projects should use a dedicated outdoor ZIP-guided system.

Request a TR110 Project Configuration

Send us your opening dimensions, curtain-box drawing, fabric requirements and side-rail preference.

NewHoo can recommend the appropriate TR110 configuration and provide technical specifications, installation guidance and a project quotation.